Module SE RGBW

The SE RGBW module is designed to control the brightness of a conventional LED strip or the color and brightness of an RGB strip.

SE RGBW supports 4 channel control.:

four single color,
one RGB strip + one monochrome,
one RGBW strip,
one biodynamic tape + two plain ones.

The single-color tape is controlled using a non-latching switch - when pressed briefly, the channel will be turned on/off, when the key is held for a long time, the brightness of the channel will change.

The RGB channel is controlled using a non-latching switch - when pressed briefly, the channel will be turned on/off, when pressed for a long time, the brightness of the channel will change, when pressed twice, the color will change.

Nutrition
Controller compatible:	AlphaSE Hub2
Power supply	12-14VDC
Power consumption	Power supply - 0,3 Watt With all channels turned on — 3.2 Watt
Exits
Number of channels	4
Maximum current	5 А per channel
Maximum voltage	24VDC for boards up to 2023/12/25 48VDC for boards from 2024г.
Inputs
Purpose	4 inputs for connecting push-button switches, motion sensors 1 input "Turn everything off"
Type of inputs	«Dry contact». Input voltage ~5 В. Current when closing the input ~2.3 мА
Functional	Channel management Implementation of a "Master Switch" Setting up notifications in Telegram via "dry contact"
Channel management	Momentary switches (default) Latching switch Motion sensor with normally open contacts Motion sensor with normally closed contacts
Indication
Power and performance indication	Flashing red ACT LED at 1Hz frequency
Communication indication	LED COMM flashes blue when polling
Interface
Control Interface	RS-485
Dimensions
Width, DIN-places	4
Dimensions	71х90,2х57,5мм.