In order for the controller to know which module to send the command to, it is necessary to address the modules. It is produced by microswitches located on the device board. To access them, carefully remove the module cover.

Addresses are indicated in binary notation. The maximum number of addresses in the system is 63. The full list of matching addresses is shown in the table. Where "+" corresponds to the upper position of the microswitch.

Address	DIP1	DIP2	DIP3	DIP4	DIP5	DIP6
1	+
2		+
3	+	+
4			+
5	+		+
6		+	+
7	+	+	+
8				+
9	+			+
10		+		+
11	+	+		+
12			+	+
13	+		+	+
14		+	+	+
15	+	+	+	+
16					+
17	+				+
18		+			+
19	+	+			+
20			+		+
21	+		+		+
22		+	+		+
23	+	+	+		+
24				+	+
25	+			+	+
26		+		+	+
27	+	+		+	+
28			+	+	+
29	+		+	+	+
30		+	+	+	+
31	+	+	+	+	+
32						+
33	+					+
34		+				+
35	+	+				+
36			+			+
37	+		+			+
38		+	+			+
39	+	+	+			+
40				+		+
41	+			+		+
42		+		+		+
43	+	+		+		+
44			+	+		+
45	+		+	+		+
46		+	+	+		+
47	+	+	+	+		+
48					+	+
49	+				+	+
50		+			+	+
51	+	+			+	+
52			+		+	+
53	+		+		+	+
54		+	+		+	+
55	+	+	+		+	+
56				+	+	+
57	+			+	+	+
58		+		+	+	+
59	+	+		+	+	+
60			+	+	+	+
61	+		+	+	+	+
62		+	+	+	+	+
63	+	+	+	+	+	+

As an example, we will set the 53rd address

Adr.	DIP1	DIP2	DIP3	DIP4	DIP5	DIP6
53	+		+		+	+